NetComm Wireless AC1200 WiFi Gigabit Router with Voice
STUN settings
The STUN settings page enables you to configure settings related to using a STUN server with your VoIP service. A STUN (Session
Traversal Utilities for NAT) server is used to permit NAT traversal for applications of real-time voice, video, messaging and other
interactive IP communications. This information will usually be supplied by your VoIP service provider and should not be needed
unless you are experiencing issues with VoIP calls or signing into your VoIP service.
Figure 54 - STUN settings
Select to Enable or Disable the STUN server functionality of the NB16WV.
Enter the STUN Server address to use.
Enter the Port with which to connect to the STUN server on.
Table 21 - STUN settings
Click Save to save your settings or Undo to discard the settings entered.
Telephony profile
The Telephony Profile page enables you to configure the way the FXS phone port (RJ-11) operates.
Figure 55 - Telephony profile
Use the drop down list to select the region closest to you to configure the FXS port operation.
Click Save to save your settings or Undo to discard the settings entered.
To Next Page
Loading...
Need help?
General
