Figure 18 - Transparent bridge configuration
In the APN name field, enter the APN that you wish to use for the mobile broadband connection.
(Optional) In the Service name field, enter a name that allows you to easily identify the connection.
Click the Save button to confirm the settings.
Click the Status menu item from the top menu bar to see the transparent bridging status.
Figure 19 - Transparent bridge mode status
Next you must configure your downstream device connected via Ethernet to the NTC-30WV to initiate a network
connection using a PPPoE client. The username and password used by the downstream device for the PPPoE session will
be passed on and used by the NTC-30WV as the packet data (PDP) context authentication settings.
To Next Page
Loading...
Need help?
General
