NetComm NTC-30WV

www.netcommwireless.com
NetComm Wireless NTC-30WV 3G Outdoor Router with Voice
/
91
Ver 1.6
Data stream applications
ENDPOINT A
ENDPOINT B
ENDPOINT A MODE /
ENDPOINT B MODE
ENDPOINTS
CAN BE
REVERSED
UNDERLYING
PROCESS
APPLICATION
1 (Serial), 8
(RS232), 9
(RS485), 10
(RS422)
1 (Serial), 8
(RS232), 9
(RS485), 10
(RS422)
Raw/Raw
N/A
socat
Serial to serial raw
data stream
1 (Serial), 8
(RS232), 9
(RS485), 10
(RS422)
2 (TCP Server), 3
(TCP Client), 4
(UDP Server), 5
(UDP Client)
Raw/Raw
Yes
socat
Serial to IP data
stream
2 (TCP Server), 4
(UDP Server)
3 (TCP Client), 5
(UDP Client)
Raw/Raw
Yes
socat
Client to server data
stream
1 (Serial), 8
(RS232), 9
(RS485), 10
(RS422)
3 (TCP Client)
Modbus Client Agent ASCII, Modbus
Client Agent RTU/raw
No
dsm_data_mover
Modbus Client Agent
functionality
1 (Serial), 8
(RS232), 9
(RS485), 10
(RS422)
2 (TCP Server)
Modbus Server Gateway ASCII, Modbus
Server Gateway RTU/raw
No
dsm_data_mover
Modbus Server
Gateway functionality
1 (Serial), 8
(RS232), 9
(RS485), 10
(RS422)
6 (GPS)
Raw/Raw
Yes
socat
Send GPS data to
serial port
1 (Serial), 8
(RS232), 9
(RS485), 10
(RS422)
7 (User
Executable)
Raw/Raw
Yes
socat
Send standard output
of user-executable
program to serial port
2 (TCP Server), 3
(TCP Client), 4
(UDP Server), 5
(UDP Client)
6 (GPS)
Raw/Raw
Yes
socat
Send GPS data to
TCP or UDP client or
server
2 (TCP Server), 3
(TCP Client), 4
(UDP Server), 5
(UDP Client)
7 (User
Executable)
Raw/Raw
Yes
socat
Send standard output
of user-executable
program to TCP or
UDP client or server
11 (Modem
Emulator)
12 (PPP Server)
Raw/Raw
Yes
modem_emul_ep
Router terminated
PPP Server
functionality for dial-up
PPP clients
11 (Modem
Emulator)
13 (IP Modem)
Raw/Raw
Yes
modem_emul_ep
Modem emulation and
tunneling via TCP/UDP
(replacement for PAD
Mode of the old
Modem Emulator)
11 (Modem
Emulator)
14 (CSD)
Raw/Raw
Yes
modem_emul_ep
Circuit Switched Data
calls via 3G/4G
module and mobile
networks
1 (Serial), 8
(RS232), 9
(RS485), 10
(RS422)
15 (TCP Client
Connect on
Demand)
Raw/Raw
Yes
dsm_data_mover
Serial to TCP server
connection, which is
initiated ONLY when
data is seen on serial
port
Table 26 - Data stream applications