WAN failover
The WAN failover page displays a summary of the configured WAN interfaces and their priorities (Metric). Lower metric values
determine higher priority. The priority of the interfaces can be adjusted using the up and down arrows in the Priority column. When
the interface with the highest priority goes down, the router fails over to the next highest priority interface. The method used to
determine whether an interface is “up” or “down” is defined by the Monitor setting.
Figure 54 - WAN summary
To edit an interface, select the edit icon for the interface you wish to edit. The Failover configuration page is displayed.
Figure 55 – Failover configuration – hardware link
The priority (metric) is a numeric value which determines which interface has priority. Lower
priority values mean higher priority.
To Next Page
Loading...
Need help?
General
