YML864 Rev1 NB504 User GuideNB504 User Guide
www.netcomm.com.au 27
4. If you choose 802.1X + Dynamic IP, you should enter the follow parameters(figure 5-8) :
Figure 5-8 802.1X + Dynamic IP Settings
• User Name - Enter the user name for 802.1X authentication provided by your ISP
• Password - Enter the password for 802.1X authentication provided by your ISP.
Click Login to start 802.1X authentication.
Click Logout to end 802.1X authentication.
• Host Name - This field is required to be filled by some service provider.
To Next Page
Loading...
