NetComm Wireless NF10WV User Guide
Displays the line number you want to configure
Select this option for your phone if your VoIP Service Provider has enabled Call Waiting on your SIP account.
Unconditionally Call forwarding
number
Select this option if your VoIP Service Provider has enabled Call Forwarding on your SIP account and you wish
to use this feature.
Busy Call Forwarding Number
Enter the phone number to forward a call to if it arrives while the line is busy.
No Answer Call forwarding
number
Enter the phone number to forward a call to if the call is not answered.
Select this option if your VoIP Service Provider has enabled Call Forwarding on your SIP account and you wish
to use this feature.
Select this option if your VoIP Service Provider has enabled Call Forwarding on your SIP account and you wish
to use this feature.
MWI (Message Waiting
Indicator)
Select this option if your VoIP Service Provider has enabled MWI (Message Waiting Indicator) on your SIP
account and you wish to use this feature.
Select this option if your VoIP Service Provider has enabled Anonymous Call Blocking on your SIP account and
you wish to use this feature.
Select this option if your VoIP Service Provider has enabled Anonymous Calling on your SIP account and you
wish to use this feature.
When set to Display anonymous, the modem hides your caller ID. When set to All anonymous, the modem
hides both caller ID and the SIP URL of the originating call.
Select this option if your VoIP Service Provider has enabled DND (Do Not Disturb) on your SIP account and you
wish to use this feature. Additionally, you must activate the feature using the handset to dial *78. DND is
deactivated automatically if the handset is put in the off-hook position.
Enable T38 Redundancy
Support
Select this function if you wish to send or receive faxes via VoIP and have a fax machine capable of using the
T38 fax over VoIP protocol.
Enable VBD redundancy
support
Select this checkbox to use the feature.
Enables the Voice Activated Detection function of the modem.
Select this checkbox to use the feature.
Select this checkbox to use the feature.
Select this checkbox to use the feature.
Enable Reinjection Function
Select this checkbox to use the feature.
RFC2198 Payload Value
(range 97-127)
Enter the RFC2198 payload value that the valid range is 96 ~ 127.
Registration Expire Timeout
Enter the registration expire timeout.
The interval of dialog refreshing time.
The minimum interval of dialog refreshing time.
Set the VoIP dial plan. If user-dialed number matches it, the number is processed by the DSL router
immediately.
Set the DSCP for SIP. You can select it from the drop-down list.
Set the DSCP for RTP. You can select it from the drop-down list.
This is the priority marking as per the 802.1p standard. Priority markings are carried in the VLAN tag.
The following priority markings are valid settings:
Background = 0 (lowest)
Best Effort = 1
Excellent Effort = 2
Critical Applications = 3
Video < 100ms latency and jitter = 4
Voice < 10ms latency and jitter = 5
Internetwork control = 6
Network control = 7 (highest)
Set DTMF transmit method, which can be following values:
– SIP Info: Use SIP INFO message to transmit DTMF digits.
– RFC2833: Use RTP packet to encapsulate DTMF events, as specified in RFC 2833.
– InBand: DTMF events are mixed with user voice in RTP packet.
Select the transport protocol to use for SIP signaling. Note that the SIP proxy and registrar need to support the
protocol you select.
Enable Local Supplementary
Service
Select the checkbox to enable the supplementary service settings by the telephone set. If you deselect the
checkbox, the supplementary service can not be set by the telephone set.
Table 4: VoIP - Advanced - Service Provider
To Next Page
Loading...
