NetCommWireless NF10WV

www.netcommwireless.com
NetComm Wireless NF10WV User Guide
61
v1.1
SIP Debug Setting
This page allows you to configure various settings regarding the logging levels of the SIP service.
OPTION
DEFINITION
SIP Log Server IP Address
Enter the IP address where the SIP Log data for the router’s currently saved VoIP account settings will be sent
to.
SIP Log Server port
Enter the port to be used for transmitting the SIP Log data for the router’s currently saved VoIP account
settings.
Ingress Gain
The incoming signal amplitude can be controlled with this field. Combined with the Egress gain a ratio can be
expressed of input to output. The Ingress Gain setting can help improve the quality of the VoIP line, and can
influence call volumes and help eliminate echoes.
Egress Gain
The outgoing signal amplitude can be controlled with this field. Combined with the Ingress gain a ratio can be
expressed of input to output. The Egress Gain setting can help improve the quality of the VoIP line, and can
influence call volumes and help eliminate echoes.