NetGain Motors HyPer 9HV IS User Manual

HyPer 9HV IS User Manual Version 06 NetGain Motors, Inc. Page 16 of 28
35. The system should now be fully operational. You can now attempt to spin the motor:
1. Select the Forward Direction
2. Press the Throttle and notice the Motor driving
3. Press the Brake and notice the Motor braking
36. If the Motor is in Blocked Rotor condition (maximum Current and 0rpm, with possible high frequency
noise), switch off the Controller. This means that the encoder wiring or motor phases are wrong. Please,
check them.

NetGain Motors HyPer 9HV IS Specifications

General

Brand	NetGain Motors
Model	HyPer 9HV IS
Category	Engine
Language	English