NETGEAR AirCard 815S

Use Your Mobile Hotspot
29
AirCard 815S Mobile Hotspot
4. Tap the WPS button.
The WPS screen displays.
5. T
o view both WPS buttons if you use a guest network, scroll down.
The screen displays the WPS for Main W
i-Fi button and the WPS for Guest Wi-Fi
button.
6. Tap the WPS for Main Wi-Fi button or the WPS for Guest Wi-Fi button.
A screen displays that shows the remaining seconds to connect with WPS.
7. Within two minutes, press the WPS button on the Wi-Fi device that you want to connect.
Your mobile hotspot and the Wi-Fi device communicate and establish the connection.
Add a WPS-Enabled Wi-Fi Device From the Mobile Hotspot Web Page
 To add a WPS-enabled Wi-Fi device from the mobile hotspot web page:
1. From a computer or Wi-Fi device that is connected to the mobile hotspot, launch a web
browser
.
2. Enter http://attwifmanager/.
The mobile hotspot web page displays.
3. Enter the administrator login password.
The default password is attadmin.
The password is case-sensitive.
The home page displays.
4. Select W
i-Fi > Connect.