NETGEAR AirCard 815S

Use Your Mobile Hotspot
30
AirCard 815S Mobile Hotspot
5. Click the WPS button for either the main Wi-Fi or guest Wi-Fi network (if available).
6. Click the button for the WPS method that you want to use:
• WPS button pairing. If the device that you want to connect includes a WPS key
, click
the WPS button pairing button and, within two minutes (120 seconds), press the
device’
s WPS key.
• Enter WPS PIN. If a WPS pin is associated with the device that you want to connect,
click the Enter WPS PIN button and enter the device’
s WPS PIN.
Your mobile hotspot and the Wi-Fi device communicate and establish the connection.
Manage Wi-Fi
Advanced users can set up the Wi-Fi radio of the mobile hotspot to meet their Wi-Fi needs by
customizing settings on the mobile hotspot web page.
On the mobile hotspot web page, the following Wi-Fi profiles are available:
• Default, main W
i-Fi. Share your main Wi-Fi with 2.4 GHz devices that you trust.
• 5 GHz W
i-Fi. Share your main Wi-Fi with 5 GHz devices that you trust.
• Dual-band W
i-Fi. Share your Wi-Fi with 2.4 GHz and 5 GHz devices.
By default, main Wi-Fi is enabled and both dual-band Wi-Fi and guest Wi-Fi are disabled. If
your place of business does not allow Wi-Fi or for any other reason you want to disable Wi-Fi
and use the mobile hotspot only in tethered mode, the mobile hotspot gives you that option.
Note: Whenever you change Wi-Fi settings, any devices connected to the
mobile hotspot are disconnected and might need to be reconnected.
Turn On 5 GHz Wi-Fi From the Mobile Hotspot
When all of your devices support 5 GHz Wi-Fi, use 5 GHz Wi-Fi for faster downloads.
 To turn 5 GHz Wi-Fi on and off from the mobile hotspot:
1. T
o wake the device, press the Power button.
2. T
ap the Home ( ) button.
The home screen displays.