NETGEAR AirCard 815S

Use Your Mobile Hotspot
32
AirCard 815S Mobile Hotspot
5. Select 5GHz Only.
The Save and Cancel buttons display at the bottom of the page.
6. Click the Save button.
A message displays telling you that to save this change, your device must restart Wi-Fi
connections.
7. Click the Save button.
Your settings are saved.
Turn On Dual-Band Wi-Fi From the Mobile Hotspot Web
Page
The mobile hotspot can broadcast Wi-Fi signals in the 2.4 GHz and 5 GHz Wi-Fi bands. Note
that the overall throughput speed could decrease when Wi-Fi dual-band is enabled.
 To turn on dual-band Wi-Fi from the mobile hotspot web page:
1. From a computer or Wi-Fi device that is connected to the mobile hotspot, launch a web
browser
.
2. Enter http://attwifmanager/.
The mobile hotspot web page displays.
3. Enter the administrator login password.
The default password is attadmin.
The password is case-sensitive.
The home page displays.
4. Select W
i-Fi > Options.
5. Select Dual-Band 2.4 & 5 GHz.
The Save and Cancel buttons display at the bottom of the page.
6. Click the Save button.
A message displays telling you that to save this change, your device must restart Wi-Fi
connections.