NETGEAR AirCard 815S

Maintain Your Mobile Hotspot
74
AirCard 815S Mobile Hotspot
8. Change the PDP (data protocol), if necessary:
• IPV4
• IPV6
• IPV4V6
9. Change the PDP roaming protocol, if necessary:
• None
• IPV4
• IPV6
• IPV4V6
Note: PDP roaming protocol is the IP protocol used while you are roaming
(for example when you are traveling and the roaming network does not
support IPv6).
10. Click the Save button.
The entry is added to the table.
Select an APN to Use
 To select an APN to use:
1. From a computer or Wi-Fi device that is connected to the mobile hotspot, launch a web
browser
.
2. Enter http://attwifmanager/.
The mobile hotspot web page displays.
3. Enter the administrator login password.
The default password is attadmin.
The password is case-sensitive.
The home page displays.
4. Select Settings > Mobile Broadband >
APN.
5. Select the Active radio button next to the APN entry.
The APN is selected.