NETGEAR Arlo Go

Settings
44
Change the Video Resolution
The default video resolution is 720p. You can change this setting to a higher or
lower resolution. Decreasing the resolution of Arlo Go videos reduces the required
WiFi bandwidth.
¾ To change the video resolution:
1. Tap the Arlo icon
on your mobile device.
You can also enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Settings.
The Settings page displays.
3. Tap or click My Devices.
A list of cameras displays.
4. Tap or click the camera.
The settings for the camera display.
5. Tap or click Video Settings.
The Video Settings page displays.
6. Tap or click Video Resolution.
The Video Resolution page displays.
7. Tap or click a setting.
8. Tap or click Done.
Your settings are saved.
Turn Night Vision On and O
We recommend that you turn o night vision if the Arlo Go camera is facing
reflective surfaces, such as windows.
¾ To turn night vision on and o:
1. Tap the Arlo icon
on your mobile device.
You can also enter arlo.netgear.com in the address bar of a browser.