NETGEAR C6220

Specify Initial Settings
23
AC1200 WiFi Cable Modem Router Model C6220
8. Select a Domain Name Server (DNS) Address radio button:
• Get
Automatically from ISP. Your ISP uses DHCP to assign your DNS servers. Your
ISP automatically assigns this address.
• Use These DNS Servers. If you know that your ISP requires specific servers, select
this option. Enter the IP address of your ISP’
s primary DNS server. If a secondary
DNS server address is available, enter it also.
9. Click the Apply button.
Your settings are saved.
Note: If you get address not found errors when you go to a website, it is
likely that your DNS servers are not set up correctly. Contact your ISP
to get the DNS server addresses.
Specify an IPv6 Internet Connection
 To specify an IPv6 Internet connection:
1. Launch a web browser from a WiFi-enabled computer or mobile device that is
connected to the network.
2. T
ype http://routerlogin.net or http://192.168.0.1.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin.
The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select ADV
ANCED > Setup > IPV6.
If your Internet provider supports IPv6, the System Delegated Prefix field displays IPv6
information.