NETGEAR C6220

Manage Your Network
78
AC1200 WiFi Cable Modem Router Model C6220
Run the Ping Utility
Ping is an administration utility that tests whether a computer on the network is reachable and
measures the time it takes messages sent from the originating device to reach a destination
computer and return.
 To run a ping test:
1. Launch a web browser from a WiFi-enabled computer or mobile device that is
connected to the network.
2. T
ype http://routerlogin.net or http://192.168.0.1.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin.
The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select ADV
ANCED > Administration > Diagnostics.
In the Utility field, Ping is selected by default.
5. Specify the following parameters for the ping utility:
• T
arget. The IP address of the ping target computer.
• Ping Size.
The size (in bytes) of the ping packet.
• No. of Pings.
The number of times to ping the target computer.
• Ping Interval.
The time between pings.
6. Click the Start T
est button.
The ping results display.
7. T
o stop a ping test, click the Abort Test button.
8. T
o clear the results from the display, click the Clear Results button.