NETGEAR CG3000D

Maintaining Your Network
30
NETGEAR DOCSIS 3.0 N450 Wi-Fi Data Gateway
3. Select Ping in the Utility list.
4. Specify the following parameters for the ping utility.
• Target. The IP address of the ping target computer.
• Ping Size. The size of the ping packet.
• No. of Pings. The number of times to ping the target computer.
• Ping Interval. The time between pings.
5. Click Start Test.
The ping results display:
 To stop a ping test:
Click Abort Test.
 To clear the results from the display:
Click Clear Results.