Supplemental Information
52
NETGEAR DOCSIS 3.0 N450 Wi-Fi Data Gateway
Factory Default Settings
You can return the gateway to its factory settings. On the bottom of the gateway, press and
hold the Reset button for over 7 seconds. The gateway resets and returns to the factory
configuration settings shown in the following table.
Table 3. Factory default settings
Parameter Default
Gateway login User login URL http://192.168.0.1
User name and password
(case-sensitive)
admin/password
Local network
(LAN)
LAN IP 192.168.0.1
Subnet mask 255.255.255.0
DHCP server Enabled
DHCP starting IP address 192.168.0.2
DHCP Ending IP address 192.168.0.254
Firewall Inbound communication from the
Internet
Disabled (except traffic on port 80, the HTTP port)
Outbound communication to the
Internet
Enabled (all)
Source MAC filtering Disabled
Internet
connection
WAN MAC address Use default hardware address
WAN MTU size 1500
To Next Page
Loading...
