Maintaining Your Network
29
NETGEAR DOCSIS 3.0 N450 Wi-Fi Data Gateway
To view the event log:
1. In the main menu, under Maintenance, select Event Log.
2. Do either of the following:
• To clear the log, click Clear Log.
• To refresh the log, click Refresh.
Run the Diagnostic Utilities
From the Diagnostics screen, you can run ping and traceroute utilities.
Ping Utility
Ping is an administration utility that tests whether a computer on the network is reachable
and measures the time it takes messages sent from the originating device to reach a
destination computer and return.
To run a ping test:
1. Log in to the gateway.
For more information, see Log In to Your Gateway on page 9.
2. In the main menu, under Maintenance, select Diagnostics.
To Next Page
Loading...
Need help?
General