EasyManuals Logo

NETGEAR CG3000D User Guide

NETGEAR CG3000D
57 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #42 background imageLoading...
Page #42 background image
Advanced Settings
42
NETGEAR DOCSIS 3.0 N450 Wi-Fi Data Gateway
DHCP Lease. For more information, see Reserve an IP Address for DHCP Use on
page 42.
3. Click Apply.
Reserve an IP Address for DHCP Use
To reserve an IP address for DHCP use, enter the DHCP server reservation settings for the
private LAN under DHCP Reservation Lease Info in the LAN Setup screen.
To reserve an IP address for DHCP:
1. In the main menu, under Advanced, select LAN IP.
2. In the DHCP Reservation Lease Info section, enter the MAC address of the computer for
which you want to reserve an IP address.
3. Enter the permanent IP address for the computer.
4. Click Add to save your settings.
The MAC address and IP address are displayed in the DHCP Client Lease Info table. The
current system time is also displayed.
To delete an IP address from the DHCP Client Lease Info table:
1. In the DHCP Client Lease Info table, select the radio button for the MAC and IP address
that you want to remove.
2. Click Delete.
The information for the selected MAC and IP address is removed from the DHCP Client
Lease Info table.
To remove all information from the DHCP Client Lease Info table, click Clear DHCP
Leases.
Lan Switch
The gateway’s LAN interference is a 10/100/1GBaseT Ethernet switch. The switch ports are
set to automatically negotiate speed and duplex with any connected device. You may want to
configure the port if the devices do not auto-negotiate correctly.

Table of Contents

Other manuals for NETGEAR CG3000D

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR CG3000D and is the answer not in the manual?

NETGEAR CG3000D Specifications

General IconGeneral
BrandNETGEAR
ModelCG3000D
CategoryGateway
LanguageEnglish

Related product manuals