FS728TP Hardware Installation Guide
Introduction 1-16
v1.0, November 2007
• Active flow control to minimize packet loss/frame drops.
• Half-duplex back-pressure control.
• Per port LEDs, System LEDs.
• Internal power supply.
• Standard 1U high, rack mountable19” chassis.
• Fan speed control supported (optional).
• The FS728TP supports the following POE functions:
– Smart Power Managed function handles the power of each port in the event of limited
available power.
– Support 24-Port POE function, 15.4W for 12 ports , 8W for 24 ports , Total 192W for
POE. The Unit uses data pairs (RJ-45 1,2,3&6 PIN) provide power to PD.
Package Contents
Figure 1-2 shows the package contents of the NETGEAR Smart Switch
Figure 1-2
To Next Page
Loading...
