NETGEAR FS728TP - ProSafe 24 Port 10/100 Smart Switch - Chapter 3 Physical Description; FS728 TP Front and Back Panels; LED Designations; Device Hardware Interfaces

3-19
v1.0, November 2007
Chapter 3
Physical Description
This chapter describes the NETGEAR Smart Switch hardware features. The topics include:
• FS728TP Front and Back Panels
• LED Designations
• Device Hardware Interfaces
Front and Back Panel Configuration
FS728TP Front and Back Panels
The NETGEAR FS728TP Smart PoE Switch has 24 ports of 10/100Mb Base-T, 2 ports of 10/100/
1000Mb Base-T and 2GbE combo (Copper/Fiber) ports.
Figure 3-1 illustrates the NETGEAR FS728TP Smart Switch front panel:
The front panel contains the following:
• 24 RJ-45 connectors for 10 Base-T, 100 Base-T and 1000 Base-T.
• Four gigabit uplink port, two of which are combo port.
• Two SFP slots for SFP modules supporting 1000(1000Base-SX/LX)/100M SFP.
• Reset button to restart the device.
• Recessed default reset button to restore the device to the factory defaults.
• Port LEDS
• System LEDs
Figure 3-1