Need help?Do you have a question about the NETGEAR ProSafe Plus and is the answer not in the manual?
Step-by-step guide to installing the ProSafe Plus Configuration Utility on a PC.
Introduces the main functionalities and tabs available within the configuration utility.
Instructions on how to remove the ProSafe Plus Configuration Utility from the system.
Explains the process of automatically detecting ProSafe Plus switches on the network.
Outlines how different features within the utility are organized into chapters.
Lists the default configuration values for various switch settings and features.
Describes the functionalities available under the System tab for switch management.
Details how to check switch operational status and view general switch information.
Covers DHCP mode selection and manual IP address configuration for switches.
Explains password changes, device reboots, and factory resets.
Guides on updating the switch firmware using the utility.
Displays port network traffic for the selected switch.
Allows a port to see the data on another port.
Checks cable connections for the ports of the selected switch.
Configuration for assigning ports to virtual networks based on port membership.
Configuration for creating virtual networks using 802.1Q tagging.
Lists defined VLANs and assigned ports, including adding/deleting VLAN groups.
Details how to add or remove ports from existing VLAN groups.
Assigns a default VLAN ID (PVID) to untagged incoming data packets.
Configures ports to add or remove VLAN ID tags for outgoing data packets.
Sets global priorities for data transmission based on port or packet type.
Assigns priority levels to data traffic on a per-port basis.
Prioritizes data based on 802.1p tags within packet headers.
Controls the ingress and egress data rates for specific ports.
Implements broadcast storm protection by filtering excessive broadcast packets.
Provides links to online resources for technical support and the user guide.
Instructions on accessing the latest version of the user guide from the website.
Guides on how to find support pages for specific switch models.
Displays software version and licensing information for the configuration utility.
To Next Page
General