NETGEAR GS105Ev2 User Manual

Chapter 4 Manage Network Settings
Specify IP Address Settings for the Switch......................................40
Use Browser-Based Access to Specify the Switch IP Address...40
Use the ProSAFE Plus Utility to Specify the Switch IP Address.41
Manage Multicast Traffic With IGMP Snooping..............................42
Customize IGMP Snooping...........................................................43
Specify a VLAN for IGMP Snooping.............................................44
Set Up Link Aggregation Groups.....................................................45
Chapter 5 Manage and Monitor the Switch
Manage Flow Control........................................................................49
Manage the Port Speed and the Port Status...................................50
Enable Loop Detection......................................................................51
Manage Power Saving Options........................................................52
Download and Update the Firmware..............................................53
Reboot the Switch...............................................................................55
Save the Switch Configuration..........................................................55
Restore a Saved Switch Configuration.............................................56
Restore Factory Default Settings......................................................57
Manage Access Control.....................................................................58
Add Devices to the Access Control Table..................................58
Remove Devices From the Access Control Table......................59
Enable Port Mirroring.........................................................................60
View Switch Information or Change the Switch Device Name.....61
View or Clear the Port Statistics........................................................62
PoE Considerations for Switches That Support PoE......................63
Chapter 6 Diagnostics and Troubleshooting
Test Cable Connections.....................................................................66
Resolve a Subnet Conflict to Access the Switch.............................67
PoE Troubleshooting Suggestions...................................................67
Appendix A Factory Default Settings
5
Gigabit Ethernet Smart Managed Plus Switches

NETGEAR GS105Ev2 Specifications

General

Model	GS105Ev2
Category	Switch
Ports	5
Switching Capacity	10 Gbps
Forwarding Rate	7.4 Mpps
VLAN Support	Yes
Quality of Service (QoS)	Yes
Energy Efficient Ethernet (EEE)	Yes
Power Supply	External Power Adapter
Storage Temperature	-20° to 70° C (-4° to 158° F)
Operating Temperature	0°C to 40°C
Humidity	90% maximum relative humidity, noncondensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3az
Dimensions	6.22 x 4.02 x 1.10 in (158 x 102 x 28 mm)
Weight	0.24 kg (0.53 lb)
Jumbo Frame Support	Yes