Manage and Monitor the Switch
42
ProSAFE Easy-Mount 8-Port Gigabit Ethernet PoE+ Web Managed Switch
9. Click the Apply button.
Your settings are saved.
Specify a Port Description
You can add a description for a port. By default, no port descriptions exist and the ports are
indicated by their numbers only.
To specify a port description:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch Using a Web
Browser on page 6.
The login window opens.
4. Enter the switch’s password in the password field.
The switch’s default password is password.
The Switch Information page displays.
5. Select System > Management > Port Status.
6. Select the check box for a port.
7. In the Port Description field, enter a description.
8. Click the Apply button.
Your settings are saved.
To Next Page
Loading...
Need help?
General
