EasyManuals Logo

NETGEAR Nighthawk RS400 User Manual

NETGEAR Nighthawk RS400
184 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Internet.
The Internet Setup page displays.
5. In the Does your Internet connection require a login? section, leave the No radio
button selected.
6.
If your Internet connection requires an account name or host name, click the Edit
button in the Account Name section and enter the account name.
7.
If your Internet connection requires a domain name, type it in the Domain Name (If
Required) field.
For the other sections on this page, the default settings usually work, but you can
change them.
8. Select an Internet IP Address radio button:
•
Get Dynamically from ISP. Your ISP uses DHCP to assign your IP address. Your
ISP automatically assigns these addresses.
• Use Static IP Address. Enter the IP address, IP subnet mask, and the gateway IP
address that your ISP assigned. The gateway is the ISP router to which your router
connects.
9. Select a Domain Name Server (DNS) Address radio button:
•
Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers.
Your ISP automatically assigns this address.
•
Use These DNS Servers. If you know that your ISP requires specific servers, select
this option. Enter the IP address of your ISP’s primary DNS server. If a secondary
DNS server address is available, enter it also.
10. Select a Router MAC Address radio button:
•
Use Default Address. Use the default MAC address.
• Use Computer MAC Address. The router captures and uses the MAC address
of the computer that you are now using. You must use the one computer that the
ISP allows.
• Use This MAC Address. Enter the MAC address that you want to use.
11. Click the Apply button.
Your settings are saved.
User Manual27Specify Your Internet Settings
Nighthawk AC2300 Cybersecurity WiFi Router Model RS400

Table of Contents

Other manuals for NETGEAR Nighthawk RS400

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR Nighthawk RS400 and is the answer not in the manual?

NETGEAR Nighthawk RS400 Specifications

General IconGeneral
NAT functionalityDouble firewall protection (SPI and NAT)
DoS attack preventionYes
VPN supportSecure access to your home network away from home
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
DSL WAN-
WAN connection typeRJ-45
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)1625 Mbit/s
WLAN data transfer rate (first band)600 Mbit/s
Product typeTabletop router
Product colorBlack
LED indicatorsPower
Flash memory128 MB
Internal memory256 MB
Processor cores2
Processor frequency1 MHz
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports4
Power source typeDC
Package depth348 mm
Package width256 mm
Package height79 mm
Package weight1450 g
Number of products included1 pc(s)
Antennas quantity3
Cables includedDC, LAN (RJ-45)
Browser supportedInternet Explorer, Microsoft Edge, Google Chrome, Firefox, Safari
Windows operating systems supportedWindows 10, Windows 2000, Windows 7, Windows 8, Windows Vista, Windows XP
Master (outer) case width190 mm
Master (outer) case height298 mm
Master (outer) case length380 mm
Master (outer) case weight380 g
Weight and Dimensions IconWeight and Dimensions
Depth184.5 mm
Width285 mm
Height50 mm
Weight750 g

Related product manuals