NETGEAR Nighthawk RS400

Contents
Chapter 1 Hardware Setup
Unpack your router.............................................................................10
Attach the antennas............................................................................10
LEDs and buttons on the top panel.................................................11
Rear panel............................................................................................12
Router label and QR Code label.......................................................13
Position your router............................................................................14
Cable your router...............................................................................15
Chapter 2 Connect to the Router’s Network and Automatically Set
Up the Internet Connection
Connect to the network.....................................................................18
Connect to the network using a wired connection....................18
Find and connect to the WiFi network........................................18
WiFi connection using WPS..........................................................18
Types of logins....................................................................................19
Use a web browser to access the router..........................................19
Use a web browser to set up the router’s Internet connection
automatically...................................................................................20
Log in to the router........................................................................22
Change the language........................................................................23
Install and manage your router with the Nighthawk app..............24
Chapter 3 Specify Your Internet Settings
Use the Internet Setup Wizard..........................................................26
Manually set up the Internet connection.........................................26
Specify an Internet connection without a login..........................26
Specify an Internet connection that uses a login and PPPoE
service..............................................................................................28
Specify an Internet connection that uses a login and PPTP or L2TP
service..............................................................................................29
Specify IPv6 Internet connections....................................................31
Requirements for entering IPv6 addresses.................................32
Use Auto Detect for an IPv6 Internet connection......................32
Set up an IPv6 6to4 tunnel Internet connection.........................33
Set up an IPv6 pass-through Internet connection......................35
3