GS716T/GS724T Hardware Installation Guide
Introduction 1-3
v1.0, June 2009
• Automatic address learning function to build the packet-forwarding information table. The
table contains up to 8K Media Access Control (MAC) addresses.
• Full-duplex and half-duplex functions for all 10/100/1000 Mbps ports.
• Store-and-Forward transmission to remove bad packets from the network.
• Full-duplex IEEE 802.3x pause frame flow control.
• Active flow control to minimize packet loss/frame drops.
• Half-duplex back-pressure control.
• Per port LEDs, System LEDs.
• Standard 1U high, rack-mountable 17-inch chassis.
• Fan speed control supported.
Package Contents
Figure 1-1 shows the package contents of the NETGEAR GS716T and GS724T Series Smart
Switch.
Figure 1-1
To Next Page
Loading...
