202-10103-01
Page 17 of 22
The example above uses “192.168.1.100” as IP address, and “192.168.1.1” as gateway IP address. You
should provide your own IP address in the above command.
If you want to use your web browser, or telnet session to manage your switch, note the IP address on the
Sysinfo page. To use your web browser, simply types the IP address in the URL address bar and hit
enter. If you want to use an SNMP management application, you will need to note the IP address and to
configure the SNMP settings in your switch so that it will respond to SNMP requests. This configuration
can be done through either the console or web browser GUI. See User Guide on how to enable SNMP
access.
Note: The switch’s managementIP address is by default using DHCP mode to assign its address. If you
leave the switch IP mode in the default DHCP mode, the IP address of your switch could change depends
on the DHCP server used at the time, and you would have to reconnect to the switch via the console port
to discover the new IP address. Change the IP mode to Manual for a more reliable connection. If you need
help changing the DHCP mode, please refer the User Manual on the Resource CD for Managed Switches.
To learn more about the managed features on your switch, refer to the manual on the Resource CD for
Managed Switches.
To Next Page
Loading...
