NETGEAR ProSafe GSM7248 Operating Instructions

202-10103-01
Page 6 of 22
Features
The following list identifies the key features of the NETGEAR ProSafe GSM7248 Managed Layer 2 Gigabit
Ethernet Switch.
• Forty Eight 10/100/1000 Mbps auto sensing Gigabit Ethernet TP ports
• Four SFP module bays combo (shared with TP) with GTP for a variety of fiber connections
• Full compatibility with IEEE standards:
o IEEE 802.3i, (10BASE-T)
o IEEE 802.3u (100BASE-TX)
o IEEE 802.3ab (1000BASE-T)
o IEEE 802.3z (1000BASE-X)
o IEEE 802.3x (full-duplex flow control)
• Full Layer 2 switch management including:
o SNMP V3
o RMON (groups 1,2,3 and 9)
o IEEE 802.1Q (up to 512 Static VLAN groups)
o IEEE 802.1D (Spanning Tree)
o IEEE 802.1w (rapid spanning tree)
o IEEE 802.1s (multiple spanning tree)
o IEEE802.3ad Link Aggregation (LACP)
o Port Mirroring
o DHCP/Bootp Client for automatic IP address set up
o Configuration file export/import
o TFTP firmware upgrade
• Security to better safeguard your network
o Password Access Control
o IP and MAC Access Control List
o RADIUS Client Support
• Traffic management to better manage traffic flows through your switch
o IEEE 802.1p (Class of Service)
o DiffServ traffic prioritization
o Broadcast Storm Control
o IGMP snooping
o Half-duplex back-pressure control
o Full-duplex IEEE 802.3x pause frame flow control
• Multiple interfaces to access the management features
o Browser-based Graphical User Interface (GUI)
o Command Line Interface (CLI)
o Telnet or Console
o SNMP-based Network Management Software (NMS)
• Automatic hardware configuration on all Ethernet RJ-45 ports
o Auto-sensing and auto-negotiating speed
o Auto Uplink™ on all ports to automatically make the right connection (MDI/MDI-X)

NETGEAR ProSafe GSM7248 Specifications

General

Brand	NETGEAR
Model	ProSafe GSM7248
Category	Switch
Language	English