NETGEAR ProSafe GSM7248

202-10103-01
Page 22 of 22
APPENDIX C: Default Settings
This appendix provides the default settings for the NETGEAR ProSafe GSM7248 Managed Layer 2 Gigabit
Ethernet Switch.
Feature GSM7248 Default Setting
Port Speed Auto-negotiation
Port Duplex Auto-negotiation
Flow Control (half duplex) Disabled
Flow Control (full duplex) Disabled
Broadcast Storm Control Enabled
Gigabit port type Auto detect
IP Configuration DHCP
Password protection Disabled
User Name Admin
Password (none)
Web Access Enabled
Java Mode Enabled
VLAN All ports belong to Default VLAN (VLAN 1) as untagged ports
Management VLAN 1
Spanning Tree Protocol Enabled (IEEE 802.1s)
Traffic Prioritization
802.1p
DiffServe
Optimized for flow control, all ports normal priority
0-31 normal priority, 32 – 63 high priority
MAC address aging 300 seconds
SNMP Community Public: Read only