4. Enter router the user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
The BASIC Home page displays.
5. Select ADVANCED > Security > Block Services.
6. If this is the first time that you add an outbound firewall rule, in the Services Blocking section, specify
how the router applies outbound rules:
• Per Schedule. Use keyword blocking according to a schedule that you set.
For more information, see Set Up a Schedule for Keyword Blocking and Outbound Firewall Rules
on page 73.
• Always. Use keyword blocking continuously.
7. Below the Service Table, click the Add button.
8. From the Service Type menu, select User Defined.
9. Specify a new outbound rule as described in the following table.
DescriptionField
Select the protocol (TCP or UDP) that is associated with the
service or application. If you are unsure, select TCP/UDP.
Protocol
Enter the start port for the service or application.Starting Port
Control Access to the Internet
70
Nighthawk AC1750 Smart WiFi Router Model R6700v2
To Next Page
Loading...
Need help?
General
