EasyManua.ls Logo

NETGEAR R6700v2 - Chapter 7 Share a Storage Device Attached to the Router; USB Device Requirements; Connect a USB Device to the Router; Share a Storage Device Attached to the Router

NETGEAR R6700v2
229 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
USB Device Requirements
The router works with most USB-compliant external flash and hard drives. For the most up-to-date list of
USB devices that the router supports, visit kbserver.netgear.com/readyshare.
Some USB external hard drives and flash drives require you to load the drivers onto the computer before
the computer can access the USB device. Such USB devices do not work with the router.
The router supports the following file system types for full read/write access:
FAT16
FAT32
NTFS
NTFS with compression format enabled
Ext2
Ext3
Ext4
The router supports the following file system types with read-only access:
HFS
HFS+
Connect a USB Device to the Router
ReadySHARE lets you access and share a USB device connected to the router USB port. (If your USB
device uses special drivers, it is not compatible.)
Figure 6. One USB 3.0 port is located on the front panel of the router
Share a Storage Device Attached to the Router
96
Nighthawk AC1750 Smart WiFi Router Model R6700v2

Table of Contents

Related product manuals