The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Static Routes.
The Static Routes page displays.
5. In the Static Routes table, select the radio button to the left of the route.
6. Click the Edit button.
The page adjusts.
7. Change the settings for the route.
For more information about the settings, see Set Up a Static Route on page 152.
8. Click the Apply button.
The route is updated in the table on the Static Routes page.
Remove a Static Route
You can remove an existing static route that you no longer need.
To remove a static route:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Static Routes.
The Static Routes page displays.
5. In the Static Routes table, select the radio button to the left of the route.
6. Click the Delete button.
The route is removed from the table on the Static Routes page.
Set Up a Bridge for a Port Group or VLAN Tag Group
Some devices, such as an IPTV, cannot function behind the router’s network address translation (NAT)
service or firewall. Based on what your Internet service provider (ISP) requires, for the device to connect
Manage the WAN and LAN Network Settings
154
Nighthawk AC1900 Smart WiFi Router Model R6900
To Next Page
Loading...
Need help?
General
