The BASIC Home page displays.
4. Select ADVANCED > Setup > QoS Setup > Downstream QoS.
The Downstream QoS page displays.
5. In the Add Rules section, select the By Device radio button.
6. If the device is in the MAC Device List, select its radio button.
The information from the MAC Device List populates the Rule Name, MAC Address, and Device
Name fields. If the device is not in the MAC Device List, complete these fields manually.
7. Click the Add button.
The rule is added to the QoS Rule table.The router assigns a high priority to video streaming traffic
from the server on the Internet to the device for which you specified the MAC address.
Change a Downstream QoS Policy Rule
You can change a custom downstream QoS policy rule.
Optimize Performance
65
Nighthawk AC1900 Smart WiFi Router Model R6900
To Next Page
Loading...
