NETGEAR R6900 - Manage the WAN and LAN Network Settings

10
Manage the WAN and LAN Network Settings
This chapter describes how you can manage the WAN and LAN network settings of the router.
The chapter includes the following sections:
• Manage the WAN Security Settings on page 140
• Set Up a Default DMZ Server on page 141
• Manage IGMP Proxying on page 142
• Manage NAT Filtering on page 143
• Manage the SIP Application-Level Gateway on page 144
• Manage the LAN IP Address Settings on page 144
• Manage the Router Information Protocol Settings on page 145
• Manage the DHCP Server Address Pool on page 146
• Manage Reserved LAN IP Addresses on page 148
• Disable the Built-In DHCP Server on page 150
• Change the Router’s Device Name on page 151
• Set Up and Manage Custom Static Routes on page 151
• Set Up a Bridge for a Port Group or VLAN Tag Group on page 154
140