EasyManuals Logo

NETGEAR R6900v2 User Manual

NETGEAR R6900v2
229 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
4. Follow the onscreen instructions.
The router connects to the Internet.
5. If the browser does not display the installation assistant page, do the following:
• Make sure that the computer is connected to one of the four LAN Ethernet ports or over WiFi to the
router.
• Make sure that the router is receiving power and that its Power LED is lit white.
• Close and reopen the browser or clear the browser cache.
• Browse to http://www.routerlogin.net.
• If the computer is set to a static or fixed IP address (this setting is uncommon), change it to obtain
an IP address automatically from the router.
6. If the router does not connect to the Internet, do the following:
a. Review your settings. Make sure that you selected the correct options and typed everything correctly.
b. Contact your ISP to verify that you are using the correct configuration information.
c. Read You Cannot Access the Internet on page 218. If problems persist, register your NETGEAR
product and contact NETGEAR technical support.
When the router connects to the Internet, you are prompted to download and install the free NETGEAR
Desktop genie app and the free ReadySHARE Vault app.
Log In to the Router
When you first connect to your router and launch a web browser, the browser automatically displays the
router’s web page. If you want to view or change settings for the router later, you can use a browser to log
in to the router’s web page.
To log in to the router:
1. Launch a web browser from a computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net.
You can also enter http://www.routerlogin.com or http://192.168.1.1.The procedures
in this manual use http://www.routerlogin.net.
Note
A login window opens.
3. Enter the router user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
The BASIC Home page displays.
Connect to the Network and Access the Router
20
Nighthawk AC1900 Smart WiFi Router Model R6900v2

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR R6900v2 and is the answer not in the manual?

NETGEAR R6900v2 Specifications

General IconGeneral
WiFi Technology802.11ac
WiFi PerformanceAC1900 (600 + 1300 Mbps)
USB Ports1 USB 3.0 port
Antenna3 external antennas
ProcessorDual Core 1GHz
Frequency BandDual Band 2.4 GHz / 5 GHz
Memory128MB Flash, 256MB RAM
SecurityGuest Network Access
Dimensions11.22 x 7.26 x 1.97 inches
Number of Ethernet Ports5 x 10/100/1000 Mbps Gigabit Ethernet ports (1 WAN & 4 LAN)

Related product manuals