NETGEAR ReadyNAS User Guide
1-12 Configuring Your ReadyNAS
v1.0, October 2007
3. Click Apply to save your changes.
Domain Security Mode
If you choose the Domain security mode option, you need to create a trusted relationship with the
domain controller or the active directory server (ADS) that will act as the authentication server for
the ReadyNAS device. You need the following information:
• Domain name
• Domain administrator login
• Domain administrator password
• If using ADS:
– DNS name of the ADS realm
– OU (Organization Unit). You can specify nested OUs by separating OU entries with
commas. The lowest level OU must be specified first.
You can elect to have the ReadyNAS automatically auto-detect the domain controller, or you can
specify the IP address. Sometimes auto-detect fails, and you need to supply the IP address of the
domain controller to join the domain.
Figure 1-15
To Next Page
Loading...
