NETGEAR ReadyNAS User Guide
Configuring Your ReadyNAS 1-49
v1.0, October 2007
Programming the Backup Button
On ReadyNAS systems that have the Backup Button feature, you can program the button to
execute one or more pre-defined backup jobs (see “Backing Up the ReadyNAS to a USB Drive”
on page 3-9 for more information).
Simply select the backup jobs in the order that you want them run and click Apply. Pressing the
Backup Button once starts the job(s).
Viewing the Backup Log
You can view the backup log while the job is in progress or after it has finished.
The log format might differ depending on the backup source and destination type that was
selected, but you can see when the job was started and finished, and whether it was completed
successfully or with errors.
Figure 1-51
Figure 1-52
To Next Page
Loading...
