The devices are added to the MAC ACL on the MAC ACL page. Devices on the MAC
ACL are an exception to the default policy:
•
If the default policy of the MAC ACL is to allow access, the added devices are
denied access.
•
If the default policy of the MAC ACL is to deny access, the added devices are
allowed access.
Manually add, remove, or change the information for a
device on a MAC ACL
After you set up a MAC ACL for a network and specify the default policy for the MAC
ACL, you can manually add a device, remove a device, or change the name (but not
the MAC address) for a device on the MAC ACL.
By manually adding a device, you can proactively control access for a device that is not
or not yet detected, or that was not detected by the router.
To manually add, remove, or change the name for a device on a MAC ACL:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window displays.
If your browser does not display a login window but displays a security warning and
does not let you proceed, see Resolve a browser security warning on page 27.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Security > MAC ACL.
The MAC ACL page displays.
5.
Go to the section for the network for which you want to manage the MAC ACL.
6.
To manually add a device to the MAC ACL, do the following:
a. Click the MANUAL button.
The Manual Access Management pop-up window opens.
b.
Enter the MAC address and device name for the device that you want to add.
c. In the Manual Access Management pop-up window, click the ADD button.
User Manual54Control Access to the Internet
Orbi Pro Router Model SRR60 and Orbi Pro Satellite Model SRS60
To Next Page
Loading...
Need help?
General
