To set up a guest network with a captive portal:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window displays.
If your browser does not display a login window but displays a security warning and
does not let you proceed, see Resolve a browser security warning on page 27.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Guest Portal.
The Guest Portal Settings page displays.
5. Select the Enable Guest Portal Network check box.
6. Leave the Enable SSID Broadcast check box selected.
Allowing the router to broadcast its WiFi network name (SSID) makes it easier to find
your network and connect to it. If you clear this check box, that creates a hidden
network.
7. To change the network name, type a new name in the Guest Portal Network Name
(SSID) field.
The name can be up to 32 characters long and it is case-sensitive. If you change the
name, make sure to write down the new name and keep it in a safe place.
8. In the Authentication Mode section, select the Local radio button.
The page adjusts.
9. To set a guest portal password, select the Password Authentication radio button
and enter the password in the field.
The password must be a minimum of 8 characters and can be a maximum of 64
characters.
Note: In order for visitors to access the Internet, they must enter this password in
the guest portal and click the AGREE button to accept terms and conditions.
10.
To set an expiration time for how long users can access the Internet, select a time
from the Expiration menu.
User Manual97Manage the LAN, WAN, and
WiFi Settings
Orbi Pro Router Model SRR60 and Orbi Pro Satellite Model SRS60
To Next Page
Loading...
Need help?
General
