NETGEAR WG511T User Manual

User Manual for the NETGEAR 108 Mbps Wireless PC Card 32-bit CardBus WG511T
Basic Setup 3-9
Install the NETGEAR 108 Mbps Wireless
PC Card 32-bit CardBus WG511T .
a. Locate an available CardBus slot on the
side of your notebook. Hold the PC Card
with the NETFGEAR logo facing up and
insert it into the CardBus slot.
After a short delay, the Found New
Hardware Wizard displays.
b. Follow the Found New Hardware
Wizard steps, click Finish when done,
and if prompted, restart your computer.
c. Next, you will be prompted to choose the
country where you are located. Select
your location from the list.
You should see the WG511T system tray
icon on the right in the lower right
portion of the Windows task bar.
Add New Hardware Wizard
Note: If Windows warns about a Digital
Signature Not Found, click Yes to continue.
WG511T System Tray Icon

NETGEAR WG511T Specifications

Radio Specifications

radio data rate	1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps and 108 Mbps in turbo mode
frequency US	2.412 ~ 2.462 GHz
frequency Japan	2.412 ~ 2.484 GHz
frequency Europe ETSI	2.412 ~ 2.472 GHz
frequency Spain	2.457 ~ 2.462 GHz
frequency France	2.457 ~ 2.472 GHz

Security

encryption	40-bit (also called 64-bit) and 128-bit WEP Encryption
electromagnetic compliance	FCC Part 15 Sub Class B
modulation type	OFDM with BPSK, QPSK, 16QAM, 64QAM, DBPSK, DQPSK, CCK

Physical Specifications

dimensions	119 x 54 x 6 mm (4.68 x 2.12 x .25 in.)
weight	46 g (1.6 oz)
warranty	NETGEAR 1-year warranty