NETGEAR WGT624 v3 User Manual

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
3-2 Connecting the Router to the Internet
v3.0, December 2005
2. Click SETUP and follow the instructions. The Smart Wizard Installation Assistant will guide
you through the setup process:
• How to change your cabling.
• How to connect to the Internet.
• How to configure your wireless settings.
– When you get to the wireless settings, you will have to select the country where you
are located and decide whether you want to have security on your wireless links
(Netgear strongly recommends enabling security).
– Depending on the type of security you select, you will also have to enter security key
or passphrase information (see Chapter 5, “Wireless Configuration” for information
on the wireless authentication and encryption parameters).
If you want to change your Internet or wireless settings later, see “Changing Your
Configuration” on page 3-6.
Figure 3-1
Click SETUP
to get started

NETGEAR WGT624 v3 Specifications

General

Brand	NETGEAR
Model	WGT624 v3
Category	Network Router
Language	English