Connecting the Router to the Internet 3-1
v3.0, December 2005
Chapter 3
Connecting the Router to the Internet
This chapter describes how to use the Smart Wizard Installation Assistant on the Resource CD to
configure your wireless router’s Internet connection and wireless parameters.
Once you are connected to the Internet and your wireless connections are working, you can also
configure the router’s content filtering parameters if you need to change the default settings. See
Chapter 4, “Content Filtering.
If you are an advanced user, you can also configure maintenance (see Chapter 6, “Maintenance)
and advanced (see Chapter 7, “Advanced Configuration) settings if you need to change the factory
defaults.
Initial Configuration
1. Insert the Resource CD into the CD drive on your computer. The following screen appears:
Note: Do not change your existing Internet connection. Instead, let the Smart Wizard
Installation Assistant on the Resource CD guide you through the setup process.
To Next Page
Loading...
