Advanced Configuration 7-1
v3.0, December 2005
Chapter 7
Advanced Configuration
This chapter describes how to configure the advanced features of your WGT624 v3 108 Mbps
Wireless Firewall Router. These features can be found under the Advanced heading in the main
menu of the browser interface.
Configuring Port Forwarding to Local Servers
Although the router causes your entire local network to appear as a single machine to the Internet,
you can make a local server (for example, a web server or game server) visible and available to the
Internet. This is done using the Port Forwarding menu. From the Advanced section of the main
menu, click Port Forwarding / Port Triggering to view the port forwarding menu, shown below.
. the Port Forwarding men u to configure the router to forward incoming protocols to computers on your local network. In addition to servers for specific applications, you can also specify a Default DMZ Server to which all other incoming protocols are forwarded. The DMZ Server is configured in the WAN Setup Menu.
Figure 7-1
Note: If you are unfamiliar with networking and routing, see “Internet Networking and
TCP/IP Addressing” in Appendix B,” for a link to a tutorial that will help you
become more familiar with the terms and procedures used in this manual.
To Next Page
Loading...
Need help?
General
