Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
5-14 Wireless Configuration
v3.0, December 2005
How to Configure WPA-PSK/WPA2-PSK Wireless Security
To configure WPA-PSK, follow these steps:
1. Click Wireless Settings in the Setup section of the main menu and select the
WPA-PSK [TKIP], WPA2-PSK [AES], or WPA-PSK [TKIP] + WPA2-PSK [AES] option
for the Security Type. The WPA-PSK [TKIP] + WPA2-PSK[AES] option is recommended,
since that option is compatible with a greater number of devices.
Note: Not all wireless adapters support WPA. Furthermore, client software is also
required. Windows XP and Windows 2000 with Service Pack 3 do include WPA
support. Nevertheless, the wireless adapter hardware and driver must also support
WPA. For instructions on configuring wireless computers or PDAs (Personal
Digital Assistants) for WPA-PSK security, consult the documentation for the
product you are using.
Figure 5-7
To Next Page
Loading...
