NETGEAR WN3100RP User Manual

Extender Network Settings
27
N300 WiFi Range Extender
 To specify WPS settings:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser
, enter www.mywifiext.net.
You are prompted to enter a user name and password.
3. Enter your email address and password.
4. Click the Menu icon
.
The extender menu displays.
5. Select Settings > W
ireless.
The Wireless screen displays.
6. Scroll down to the Connect Devices (WPS) section:
7. Adjust the settings.
8. Click the SA
VE button.
Your settings are saved.
Deny Access to a Computer or WiFi Device
By default, access control is disabled so that it is easy for you to connect to the extender’s
WiFi networks.
You can deny network access to specific computers and WiFi devices based on their MAC
addresses. Each network device is assigned a MAC address, which is a unique 12-character
physical address containing the hexadecimal characters 0–9, a–f, or A–F only and separated
by colons (for example, 00:09:AB:CD:EF:01). Typically, the MAC address is on the label of
the WiFi device. If you cannot access the label, you can display the MAC address using the
network configuration utilities of the computer. You might also find the MAC addresses on the
Connected Devices screen (see View Connected Devices on page 19).

NETGEAR WN3100RP Specifications

General

Type	Network transmitter
Maximum transfer distance	- m
Windows operating systems supported	Yes
Product color	White
Bandwidth	2.4 GHz
Cabling technology	10/100Base-T(X)
Security algorithms	WEP, WPA2-PSK, WPS
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN (RJ-45) ports	1

Weight and Dimensions

Depth	32.5 mm
Width	55 mm
Height	114 mm
Weight	175 g