NETGEAR WN3100RP User Manual

Maintain and Monitor the Extender
35
N300 WiFi Range Extender
Back Up and Manage the Extender Configuration
When the extender works correctly after initial setup, NETGEAR recommends that you back
up the extender configuration settings. After you back up the settings, if you change the extender
configuration settings but are not content with the new settings, you can restore the extender
configuration to the backed-up settings.
Back Up the Configuration Settings
You can back up the configuration file of the extender.
 To back up the extender configuration settings:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser
.
2. In the address field of your browser
, enter www.mywifiext.net.
You are prompted to enter a user name and password.
3. Enter your email address and password.
4. Click the Menu icon
.
The extender menu displays.
5. Select Settings > Other.
6. Click the BACKUP button.
Your browser extracts the configuration file from the extender. By default, the name of the
backup file is NETGEAR_WN300RPv2.cfg.
7. If your browser is not set up to save downloaded files automatically
, locate where you want
to save the file.
Restore the Configuration Settings
You can restore the configuration file of the extender to a previously saved configuration file.

NETGEAR WN3100RP Specifications

General

Type	Network transmitter
Maximum transfer distance	- m
Windows operating systems supported	Yes
Product color	White
Bandwidth	2.4 GHz
Cabling technology	10/100Base-T(X)
Security algorithms	WEP, WPA2-PSK, WPS
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN (RJ-45) ports	1

Weight and Dimensions

Depth	32.5 mm
Width	55 mm
Height	114 mm
Weight	175 g