NETGEAR WNDR3400v2

USB Storage
57
N600 Wireless Dual Band Router WNDR3400v2
 To set up approved USB devices:
1. Select Advanced > Advanced Setup > USB Settings. The following screen displays:
2. Click the Approved Devices button. The USB Drive Approved Devices screen displays:
This screen shows the approved USB devices and the available USB devices. You can
remove or add approved USB devices.
3. To add an approved USB device, select it from the Available USB Devices list, and then click
Add.
4. Select the Allow only approved devices check box.
5. Click Apply so that your change takes effect.