Hardware Setup
13
N300 Wireless Gigabit Router WNR3500Lv2
Cable Your Router
The installation guide that came in the box has a cabling diagram on the first page. This
section walks you through cabling with detailed illustrations.
1. Con
nect the router, the computer, and the modem.
2. Turn off and unplug the modem. If your modem has a backup battery, remove it as well.
3. Locate the Ethernet cable (
1) that connects your computer to the modem.
4. Disconnect the cable from the modem (2). You will connect it to the router later.
5. Locate the Ethernet cable that came wit
h the NETGEAR product. Securely insert that
Ethernet cable into your modem and into the Internet port of the router.
To Next Page
Loading...
