NETGEAR WNR3500Lv2 - Setup Menu

Genie Advanced Home
34
N300 Wireless Gigabit Router WNR3500Lv2
Within 2 minutes, go to the client device and use its WPS software to join the network
without entering a password.
The router attempts to add the WPS-capable device. The WPS LED
on the front of
the router blinks green. When the router establishes a WPS connection, the LED is solid
green, and t
he router WPS screen displays a confirmation message.
4. Repeat
Step 2 and Step 3 to add another WPS client to your network.
Setup Menu
Slect Advanced > Setup to display the Setup menu. The following selections are available:
• Internet Setup. This is a sho
rtcut to the same Internet Setup screen that you can access
from the dashboard on the Basic Home screen. See Internet Setup on pa
ge 22.
• Wireless Setup. This is a shortcut to the same Wireless Settings screen that you can
access from the
dashboard on the Basic Home screen. See Basic Wireless Settings on
p
age 26.
• Guest Network. This is a
shotcut to the same Guest Network screen that you can access
from the dashboard on the Basic Home screen. See Guest Networks on pag
e 29.
• WAN Setup.
Internet (WAN) setup. See WAN Setup on page 35.
• LAN Setup. Loca
l area network (LAN) setup. See LAN Setup on page 38.
• QoS Setup.Quality of Service (QoS) setup. Se
e Quality of Service (QoS) Setup on
page 41.